SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Forum > Beginner's Forum > Finishing sewn seams with serger? ( Moderated by EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Finishing sewn seams with serger?
stirwatersblue
star
stirwatersblue
Intermediate
KS USA
Member since 12/13/08
Posts: 3194
Send Message

      



Date: 5/29/12 2:43 PM

I'm making a pair of pants from a beautiful drapey wool crepe, and it's really ravelly. I was too scared to try sewing them together with my new(ish) serger, but I'd love to have the beautiful serged finish inside. Can I do this? Did I need to serge the seam allowances first, or can it still be done once everything is sewn together (seams are already pressed)? I have a nice overcast stitch on my SM, but that sort of defeats the purpose of having the serger in the first place!

Advice?
Thanks!!

------
~Gem in the prairie

Trinity.
starstar
Trinity.
Intermediate
MA USA
Member since 10/9/05
Posts: 1385
Send Message

      



Date: 5/29/12 3:09 PM

It's probably good that you didn't sew the seams with the serger -- I haven't had very good experiences with just the serged seam and ravelly fabrics. I've had a couple of things pull apart at the seams because the fabric was too loosely woven. The 1/4 inch SA that was left after serging just wasn't enough to keep the threads from simply pulling away at the seamline. Now I hardly ever use the serger to sew woven seams unless I'm absolutely sure that it won't happen again.

Once it's seamed, though, there's no reason you can't serge the seam allowances for a nice finish. If you're stitching the SAs together, it's pretty easy.
Finishing them separately is a little trickier, but it can still be done.

------
Trinity

http://thimblesthreadsandneedles.blogspot.com/

diane s
star
diane s  Friend of PR
Intermediate
OR USA
Member since 8/24/02
Posts: 4697
Send Message

      



Date: 5/29/12 4:38 PM

With a fabric that ravels alot, I prefer to serge the edges first, so it's not so messy when handling. I do it right on the edge,without cutting.
To finish the seams after, just open the seam and go down each edge, or serge them together. Much faster than with your sewing machine.

------
My grandmother taught me to sew when I was 10, and I've been sewing ever since.

Laurie Lou
star
Laurie Lou  Friend of PR
Intermediate
MN USA
Member since 10/16/05
Posts: 420
Send Message

      



Date: 5/29/12 5:27 PM

I too do as Diane S i just cut off just a fraction of the edge to keep them clean and my serger does a nicer job. I agree don't serge together.

------
Laurie Lou

LynnRowe
starstar
LynnRowe  Friend of PR
Advanced
BC CANADA
Member since 3/9/09
Posts: 9172
Send Message

      



In reply to stirwatersblue <<


Date: 5/29/12 7:27 PM

I often use my serger to finish seams. Always press the seam flat as sewn, and then open...even if you plan to finish the seams together as one. Just press the seams flat again after pressing open.

Pressing seams open is "busting" the seam, and it makes a huge difference in the appearance and lay of the seam line.

You can also use your serger to protect fabrics from unraveling in the prewashing; just serge both raw edges first, and no ball of thread when the spin cycle is done.

------
I heart Panzy, Pfaff Creative Performance, the sewing machine love of my life!
And Baby (Enlighten serger), Victor (BLCS), Rupert (Pfaff 2023-knits expert) Ash (B350SE-Artwork), Kee (B750QEE-Panzy's BFF), Georgie (B560-Kee's baby sister) and the Feather-Flock!

Most of all, I heart Woo (HimmyCat). Until we meet again, my beautiful little boy. I love you.

heathergwo
heathergwo  Friend of PR
Advanced Beginner
CA USA
Member since 11/14/11
Posts: 958
Send Message

      



Date: 5/29/12 8:14 PM

I agree with all above... no reason you can't serge after you've sewn together.

BUT... if I can throw another idea out there... I really like French seams for very ravelly fabrics. It's very easy to do and as long as your fabric isn't super thick, it shouldn't add much bulk. It's another way to keep really ravelly fabrics nice on the inside!

------
Brother Innovis 1250D
Babylock Enlighten
Singer Curvy 8763
Brother 1034D
Janome 385.19606
Brother 2340CV

Nancy K
starstarstar
Nancy K
Advanced
NY USA
Member since 12/28/04
Posts: 8212
online now
Send Message

      



In reply to stirwatersblue <<


Date: 5/29/12 10:24 PM

You really should line your pair of wool crepe pants which will protect them from raveling and make them last longer. Also wool can be itchy. But in any event you should not just sew a pair of pants with a serger. Sew with your machine, press open and then finish your seams. You can't easily alter or fit pants whose seams have been serged together.

------
www.nancyksews.blogspot.com

arianamaniacs
starstarstarstar
arianamaniacs  Friend of PR
Advanced
AUSTRIA
Member since 6/11/04
Posts: 1186
Send Message

      



Date: 5/30/12 2:38 AM

I also sew first and then finish the seams with the serger. I find serger seams to be much weaker than a sewing machine seam

mastdenman
star
mastdenman  Friend of PR
Intermediate
CA USA
Member since 1/12/04
Posts: 6111
Send Message

      



Date: 5/30/12 11:23 AM

If I'm making a pair of pants out of wool, I always serge the cut out pieces with a narrow three thread serge before sewing the pants. click here By the way, these pants have been washed and worn repeatedly. I believe on these I probably used a four thread serger seam on the cut out pieces.
-- Edited on 5/30/12 11:26 AM --

------
Marilyn

January 2009 to January 2010 81 yards out and 71yards in January 2010 to the present 106.7 yards out and 146.5 yards in. January 2011 to the present: 47 yards out and 69 yards in.

couturemom
star
couturemom
Advanced
NC USA
Member since 7/19/11
Posts: 112
Send Message

      



Date: 5/30/12 12:50 PM

It's so interesting how everyone has their own method. I personally do not serge edges before sewing the seam, as I'm afraid it will distort the fabric and stretch the edges I'm trying to align.

I do agree with NOT serging the edges together, though, as the seam would be bulkier, which you don't want on crepe pants.

Thanks for the tip on pressing seams flat, even if you're serging the edges together. I have never done this, but can see how that would make for a nicer pressed seam, especially on the outside.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Beginner's Forum >> Finishing sewn seams with serger?

Merchants on PR

Patterns from the Past


vintage sewing patterns
Deals!

Reconstructing History


Reconstructing History
Web site

Elliott Berman Textiles


Fabrics for Greater Ideas
Deals!

Gwyn Hug


Fabric Shopping Help!
Deals!

Lanetzliving Vintage Sewing Patterns


Vintage Sewing Patterns
Deals!

 
adv. search»
pattern | machine | member
        
Create a Jacket Muslin
Create a Jacket Muslin

Register

Expert Sewing Techniques for Jackets
Expert Sewing Techniques for Jackets

Register

Self Drafted Pattern 100492-1031

photo
by: petro

Review
DVD - Will this fabric work for you?

DVD - Will this fabric work for you?

Buy Now
You Sew Girl Mod Bag Pattern

You Sew Girl Mod Bag Pattern

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.