SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
Fabulous Fit
Fabulous Fit

Forum > Sewing Machines > Singer 201-2 & Singer Brand Packaged Bobbins....Help! ( Moderated by Sharon1952, EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Singer 201-2 & Singer Brand Packaged Bobbins....Help!
M.S.
star
M.S.
Ohio USA
Member since 3/6/09
Posts: 1296
Skill: Intermediate
Body Type:
Send Message

      



Date: 9/1/12 12:44 PM

How tight should the bobbins fit? Mine seem too tight. I have to force it in. The machine didn't have a bobbin when I got it. I bought the 4-pack of metal Class 66 bobbins from Joann Fabrics....Singer brand.

------
Janome Skyline S5
Brother PQ1500S
Necchi 4795 Royal Series
Singer 201-2
Pfaff 138-6
Janome Coverpro 1000
Kenmore 16644 Overlock 2/3/4D
US Blindstitch 718-9

tgm and Kittys
star
tgm and  Kittys
Wisconsin USA
Member since 3/8/10
Posts: 8323
Skill: Advanced Beginner
Send Message

      



In reply to M.S. <<


Date: 9/1/12 12:47 PM

You should not have to force it. I got mine from Sew Classic & they fit just fine. The ones I got Dritz brand did not fit well & also seemed to affect the stitch. Size 66 metal from Sew Classic seem to work the best for me. Hope this helps.

------
The Girls... Baby & Mittee girl >^,,^
It's all about The Baby , about the Baby, about The Babe ....Big Smile! (sung off key ..la la la )

Here comes the big 60! OH MY!

The sewing workers:
Hello Kitty Kate (green), Hello Kitty Valerie, Dottie Kenmore, Bubba Kenmore the traveler,has case does travel.
Be still and Know that I AM God +

lisalu
star
lisalu
Member since 10/5/08
Posts: 2625
Skill: Advanced Beginner
Send Message

      



Date: 9/1/12 1:02 PM

You know, from my experience the actual vintage bobbins work best. I hoard them! (I occasionally buy/sell vintage machines and collect the bobbins and accessories that come with them.)

Once I actually collected enough that I sold off some extras on eBay and they went fast. You can always check there for ORIGINAL bobbins. Make sure that's what you are getting.

------
Jim (Singer 301), Margaret (Singer 201-2), Betty (Singer 15-91), Bud (Singer 503), Kathy (Singer 221), Liz (Singer 221 Centennial Edition)
http://runningstitches-mkb.blogspot.com/

M.S.
star
M.S.
Ohio USA
Member since 3/6/09
Posts: 1296
Skill: Intermediate
Body Type:
Send Message

      



Date: 9/1/12 1:10 PM

Thank you all. Actually, duh, I looked in the accessory box & voila 4 shiny old bobbins. They are shaped differently....slightly smaller in diameter, and less curved. They don't fit my 201's bobbin winder, though. Hole is too small. Not too big a deal, I can wind them on my modern Necchi. That seems unfortunate, though. The duds fit on the bobbin winder. I wonder if the bobbin winder got replaced along the way & is wrong or too new?????

------
Janome Skyline S5
Brother PQ1500S
Necchi 4795 Royal Series
Singer 201-2
Pfaff 138-6
Janome Coverpro 1000
Kenmore 16644 Overlock 2/3/4D
US Blindstitch 718-9

FW221circa1947
FW221circa1947
Member since 7/29/12
Posts: 22
Skill: Beginner
Send Message

      



In reply to lisalu <<


Date: 9/1/12 2:40 PM

You are so right about the vintage bobbins and bobbin cases. I bought a replacement bobbin case for my Featherweight machine and I thought my machine was going to fall apart. The clickity clack and the 1 or 2 stitches my machine tried to make only to look underneath the fabric to see a big thread ball mess. I was SO upset. So I took my bobbin case out of my other 221 machine and everything worked perfectly on the 2nd machine. That taught me a lesson to buy vintage original parts if at all possible. I compared the two bobbin cases side by side. The repro had notches and gouges out of the side of it, rough milling, thin metal out of round, not a smooth working latch, plus it was not machined exactly as the original. The original was smooth working and very nicely milled. I would NEVER again buy a reproduction bobbin case. I found a nice vintage bobbin case on ebay for a very reasonable price, actually cheaper than the repro one. Hope this helps!

mollycoomer
star
mollycoomer
Member since 8/26/10
Posts: 100
Skill: Beginner
Send Message

      



Date: 9/2/12 1:09 AM

I have 3 vintage Singers (presently trying to sell a 403-A and 15 91
and joined a couple of yahoo groups. One person stated a common problem was that the bobbin tire would wear out on these machines & have to be replaced. When I got my featherweight that was the only thing that needed repair. This person suggested winding bobbins on a seperate bobbin winder instead. I can't remember which one he used but I have a Simplicity Sidewinder that cost about $30, is alot easier as well as faster & cheaper then replacing the bobbin winder in your machine. I also use it for other sewing machines when I'm in a hurry because it's so much easier & winds a tight bobbin.Just have to watch it as it winds too much thread on the bobbin for my Pfaff so I stop it before it stops automatically.

doxieluvr

doxieluvr  Friend of PR
Pennsylvania USA
Member since 1/18/08
Posts: 24
Skill: Beginner
Send Message

      



Date: 9/2/12 5:17 AM

I have a 201-2 and have also used the bobbins from Sew-Classic. They seem to work well for me.

mssewcrazy
star
mssewcrazy  Friend of PR
Mississippi USA
Member since 3/4/03
Posts: 2600
Skill: Advanced
Send Message

      



Date: 9/2/12 8:02 AM

I have a 201 and don't recall a tight fit on the bobbin as you describe. Something is not right with this. Some of the new bobbins I had picked up didn't seem to fit well on the bobbin winder post but worked ok in the machine. I'm another that got a bobbin winder (deluxe simplicity) and like it as all but my featherweight in these vintage machines use the class 66 and I wind off factory cones at times. You aren't by chance filling the bobbin too much. Will the bobbin empty fit easily or is it a tight fit empty? I get bobbins from sew classic also as I got a bad few mixed in the ones I got off the store rack.

lisalu
star
lisalu
Member since 10/5/08
Posts: 2625
Skill: Advanced Beginner
Send Message

      



In reply to mollycoomer <<


Date: 9/2/12 10:09 AM

Not sure how you figured it, but a bobbin winder tire costs 59 cents vs $30 for a Sidewinder.

Bobbin Winder Tire on Sew Classic

Yes, a Sidewinder is handy to have, but no way is it cheaper than replacing a bobbin winder tire. (Featherweights don't have a tire, though, are you talking about replacing the entire bobbin winder?)

Nor is it necessarily faster since on some of your vintage Singers you can wind your bobbins while you sew if you have an extra spool of thread. No need to stop and rewind when you run out during your project.

-- Edited on 9/2/12 11:00 AM --

------
Jim (Singer 301), Margaret (Singer 201-2), Betty (Singer 15-91), Bud (Singer 503), Kathy (Singer 221), Liz (Singer 221 Centennial Edition)
http://runningstitches-mkb.blogspot.com/

M.S.
star
M.S.
Ohio USA
Member since 3/6/09
Posts: 1296
Skill: Intermediate
Body Type:
Send Message

      



Date: 9/2/12 11:42 AM

The tire on mine is fine. It's the peg the bobbin goes on.....the original bobbins that actually work in my machine don't fit on the winder.

The Joann/Singer bobbins won't even fit in the machine with no thread.

I'll get some bobbins from Sew Classic and see if the hole is big enough for the winder peg and fit in the machine, too. I can't live with only 4 bobbins, right?

------
Janome Skyline S5
Brother PQ1500S
Necchi 4795 Royal Series
Singer 201-2
Pfaff 138-6
Janome Coverpro 1000
Kenmore 16644 Overlock 2/3/4D
US Blindstitch 718-9

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Sewing Machines >> Singer 201-2 & Singer Brand Packaged Bobbins....Help!

Merchants on PR

O! Jolly! Shop


Sweater Knit Fabrics
Web site

Amulet Swim Fabrics


Poly/PBT swimwear fabric
Web site

Vesta Patterns


vestapatterns.com
Web site

Paganoonoo


Upcycle sewing patterns
Web site

Style Arc sewing dress patterns


Patterns That Fit
Web site

 
adv. search»
pattern | machine | member
        
Online Class
Expert Sewing Techniques for Jackets
Expert Sewing Techniques for Jackets

Class Details

Online Class
Put it on the Bias
Put it on the Bias

Class Details

Other Thread Catcher Pattern

photo
by: sfshaza

Review
SewBaby Snappy Wrap Pattern

SewBaby Snappy Wrap Pattern

Pattern Details
Sewn Square One Upline Jacket Pattern

Sewn Square One Upline Jacket Pattern

Pattern Details

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2015 PatternReview.com® , OSATech, Inc. All rights reserved.