SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
Fashion Fabrics Club
Fashion Fabrics Club

Forum > Beginner's Forum > Sewing Swimsuit Fabric ( Moderated by EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Sewing Swimsuit Fabric
top layer keeps pulling to the left...why??
Immelu
star
Immelu  Friend of PR
Intermediate
Kansas USA
Member since 5/6/06
Posts: 343
Send Message

      



Date: 12/2/12 7:02 PM

I'm in the process of making some swimsuits. I want the suits lined, and I've found that as I'm sewing one layer on top of the other, the top layer wants to slip to the left. This seems to happen mostly when I'm basting the fashion fabric to the lining.

Any ideas? I've tried my walking foot and it had the same problems. More pins? A teflon foot?

SheBear0320
starstar
SheBear0320  Friend of PR
Advanced
Manitoba Canada
Member since 4/8/08
Posts: 3911
Send Message

      



In reply to Immelu <<


Date: 12/2/12 7:08 PM

Can you adjust the pressure of your presser foot?

Also check your tension.

What stitch are you using? When I baste my lining to the spandex swimsuit fabric I use a narrow zigzag stitch.

I usually use a regular zigzag foot but there have been times I've had to pull out the teflon foot.

Do you know what the blend of your fabrics is? Do they have a similar degree of stretch?

------
Sheila
"sewing very slowly to fill an empty closet"

2014 Stash Busting Sew-Along:
56.0 yards sewn (as of 08/13/14)
113.125 yards purchased (as of 08/13/14)

Immelu
star
Immelu  Friend of PR
Intermediate
Kansas USA
Member since 5/6/06
Posts: 343
Send Message

      



In reply to SheBear0320 <<


Date: 12/2/12 7:37 PM

Quote: SheBear0320
Can you adjust the pressure of your presser foot?



Also check your tension.



What stitch are you using? When I baste my lining to the spandex swimsuit fabric I use a narrow zigzag stitch.



I usually use a regular zigzag foot but there have been times I've had to pull out the teflon foot.



Do you know what the blend of your fabrics is? Do they have a similar degree of stretch?




Hmm, I don't think I can adjust the pressure, but I'll check. It seems like the problem is the presser foot, combined with using 1/4 inch seam allowances. With 1/4 inch seam allowances, the fabric doesn't quite catch the right feed dog on my machine.

I'll adjust the tension and see if that helps.

I am using a narrow zigzag and am using two 4-way stretch swimsuitings with similar stretches. I'm perfecting the fit of a bikini bottom (ugh) so I've made three samples in the last day or so. I think I've got the fit...now if I could just work out that pesky construction issue. It's not bad enough to screw it up majorly...just bad enough to annoy me.







-- Edited on 12/2/12 7:38 PM --
Sarsez
star
Sarsez
Intermediate
AUSTRALIA
Member since 7/2/09
Posts: 757
Send Message

      
thumbsup 1 member likes this.



Date: 12/2/12 7:45 PM

I narrowly zig zag the lining and fashion fabric together just on the very edge of the two fabrics before I begin construction then handle the piece as one. A bit like underlining a woven garment.
I personally prefer to work with 10mm sa's rather than 6mm. Just gives a more even feed through the dogs esp with 4 way stretch.

I loathe fitting bikini bottoms too...

------
24th Nov 12 to 28th Nov 13
Fabric and patterns rules for me.
Remember to shop your stash girl!
Remember to keep sewing to your wardrobe plan!

Judy Kski
star
Judy Kski  Friend of PR
Intermediate
Florida USA
Member since 10/26/08
Posts: 1500
Send Message

      



In reply to Sarsez <<


Date: 12/2/12 9:29 PM

Edited due to my inattention.
-- Edited on 12/3/12 11:09 AM --

------
Judy

Immelu
star
Immelu  Friend of PR
Intermediate
Kansas USA
Member since 5/6/06
Posts: 343
Send Message

      



In reply to Sarsez <<
thumbsup 1 member likes this.


Date: 12/2/12 10:30 PM

Sarsez, That's exactly what I'm doing...maybe on the next pair I cut, I'll increase the seam allowances.

I finalized the winning pair...after 4 samples. I can now make a pair, start to finish, in 1 hr and 15 minutes. Not bad... I plan to stick that bottom on whatever one piece suit or bikini I decide to make, so I figure it was well worth the time. My hubby and I are planning a vacation over Christmas, so I want to have several suits made by then.

My winning pair was a basic kwik sew, with the back traced on the next size up, a narrowed crotch, and the elastic shortened by two inches. I read in someone's review on another kwik sew that they typically had to shorten the elastic and that was the trick that turned these from "ok" to "fantastic!"

Tarrbaby
Tarrbaby  Friend of PR
Intermediate
Member since 10/28/06
Posts: 198
Send Message

      



Date: 12/3/12 7:53 AM

What about a light basting spray, like for embroidery, or quilting? It temporarily sticks the two fabrics together.

------
Dawn T.

VivianZ
star
VivianZ  Friend of PR
Intermediate
Louisiana USA
Member since 12/8/04
Posts: 509
Send Message

      



Date: 12/3/12 9:04 AM

I have 2 possible solutions. 1st, there is a product called Wonder Tape by W.H. Collins, Inc. It is a 2 sided sticky, 1/4 wide tape that washes away and leaves no trace. I first bought it on line, and then found it locally. It has save me in doing narrow hems, cover stitch hems, and joining 2 difficult fabrics.
2nd, maybe try a 1/4" foot or a quilt foot, to help the fabric grab under the presser foot.
Good luck.

------
height 5'2" bust 36, waist 31, hip 39.
I have way too many yards to count, and I will never use them up, but I will die trying!

diane s
star
diane s  Friend of PR
Intermediate
Oregon USA
Member since 8/24/02
Posts: 4763
Send Message

      



Date: 12/4/12 0:16 AM

When I line a front, I sew the back and front together at the side seams. Then I sew the front lining on with the right side facing the wrong side of the back. I sew the lining on at the side seams, then flip it to the front and the side seams are incased.

------
My grandmother taught me to sew when I was 10, and I've been sewing ever since.

GwenH
GwenH
Advanced Beginner
California USA
Member since 8/26/09
Posts: 709
Send Message

      



In reply to Immelu <<


Date: 12/4/12 3:17 AM

Quote Hmm, I don't think I can adjust the pressure, but I'll check.

Just in case you didn't solve this yet, most every machine has a pressure adjustment. All the machines I'm familiar with, it will be something that looks like a post on top of the machine directly above where the needle is. It presses down and pops up. The instruction manual will describe the appropriate positions for various operations, but it's not hard to tell which direction reduces or increases the pressure.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Beginner's Forum >> Sewing Swimsuit Fabric

 
adv. search»
pattern | machine | member
        
Restyling with Exposed Zippers
Restyling with Exposed Zippers

Register

Altering Jackets
Altering Jackets

Register

No Pattern Used 1

photo
by: Saint Nolt...

Review
Simplicity 9958

photo
by: slmstyle

Review
SewBaby Casserole Carrier Pattern

SewBaby Casserole Carrier Pattern

Buy Now
Christine Jonson Cuff Pant

Christine Jonson Cuff Pant

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.