VickeyJ
Member since 1/13/13
Posts: 2 |
Login to reply to this post
Date: 2/8/13 1:11 PM I have a Juki MO 655 Serger which I am relatively new to. I can't seem to get it to sew a 4 thread overlock stitch, as the Left needle doesn't sew- I have changed the needle and rethreaded about 20 times! Anyone have any thoughts about this? |
VickeyJ
Member since 1/13/13
Posts: 2 |
Login to reply to this post
 1 member likes this.
Date: 2/8/13 2:55 PM Never mind- got it!! For others who might have the same problem - on the Juki 655 - there is also a chain stitch - (haven't got that working yet!) - I was putting the second needle in the hole that goes with that -- I never realized that there were two needles very close together -- (duh!!) Okay - now I know-- on to the chain stitch! |
Invisigal
Intermediate
Member since 11/7/09
Posts: 563 |
Login to reply to this post
Date: 2/8/13 3:04 PM Don't feel bad! I've had these sorts of difficulties with sergers. Everything has to be just right, threaded in the correct order, etc. Happy serging!  |
dosblakey
Member since 10/1/10
Posts: 1 |
Login to reply to this post
Date: 2/17/13 3:22 PM Where is the insert point? Are the needles side by side or are they offset? HELP PLEASE!!!!
-- Edited on 2/17/13 3:24 PM -- |
amy rodri
Beginner
Member since 1/25/13
Posts: 3 |
Login to reply to this post
Date: 3/7/13 5:21 PM I have a 655 juki serger and I can't figure out how to do the 5 thread safety stitch. can't get the purple looper or left needle to sew but a few stitches and thengo straight. Help please!!
|
misschris
AUSTRALIA
Member since 2/3/06
Posts: 1327 |
Login to reply to this post
1 member likes this. There's a manual available here ------
chris
Melbourne
|
|Login|Help]
Printable Version
