jazzyfay21
Member since 10/24/11
Posts: 2 |
Login to reply to this post
Date: 2/8/13 7:23 PM Ok everyone, i just ordered the Juki F600. I need a ruffler foot to go along with it. I don't know which one to get. Is the machine a low shank? high shank? or should I get a snap on ruffler?
Please Help!! |
Coconuts
 
Intermediate
MI USA
Member since 12/2/09
Posts: 1106 |
Login to reply to this post
Date: 2/9/13 0:50 AM I haven't tried the rufflers, but the Greist hemmer feet and the binder fit well enough to work better than they did on my previous curse inducing machine. |
OBX
Advanced Beginner
NC USA
Member since 4/23/10
Posts: 150 |
Login to reply to this post
In reply to jazzyfay21 <<
Date: 2/9/13 7:52 AM The easiest thing to do would be to contact an online vendor and tell them which machine you have. They should be able to sell you the correct foot. |
jazzyfay21
Member since 10/24/11
Posts: 2 |
Login to reply to this post
Date: 2/10/13 8:26 PM Thank you so much for your advice. |
ensete2002
Beginner
NJ USA
Member since 7/15/10
Posts: 11 |
Login to reply to this post
Date: 3/4/13 2:22 PM here's a great guide to determine which kind of shank your sewing machine has:
http://blog.sew-classic.com/2009/01/09/identify-the-type-of-feet-for-your-sewing-machine.aspx
[NAYY] ------
nina
"If a thing is worth doing, it is worth doing badly." GK Chesterton
Kenmore 385 12216.
http://fabricfetishist.blogspot.com/ |
NM gal
Beginner
Member since 5/27/09
Posts: 1163 |
Login to reply to this post
Date: 3/4/13 5:32 PM Please post if you find a ruffler foot for your Juki & it it works well. Thanks. |
|Login|Help]
Printable Version
