SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
Fashion Fabrics Club
Fashion Fabrics Club

Forum > Beginner's Forum > How to use a bias tape foot? ( Moderated by EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
How to use a bias tape foot?
allorache
allorache  Friend of PR
Advanced Beginner
OR USA
Member since 12/10/11
Posts: 297
Send Message

      
thumbsup 1 member likes this.



Date: 2/17/13 10:14 PM

So I got the bias tape foot for my Babylock Melody, and I've figured out how to get the foot on and feed the tape through. I was keeping my fabric and tape together with clover clips. The bias tape did get sewn on, but the fabric didn't seem to feed evenly and the bias tape came out kind of wrinkly. Is there a trick to feeding the fabric and bias tape? Is it better to pin or is there a better method to feed the fabric and tape through?

Thanks for any tips

------
New Ovation!! Now a Babylock girl almost all the way - Ellegante 3, Evolution, and Melody. Plus a Sailrite LSZ-1 for those heavy duty projects

PattiAnnJ
star
PattiAnnJ
Advanced
OH USA
Member since 12/3/06
Posts: 7267
Send Message

      



Date: 2/18/13 10:44 AM

Maybe there was too much tension on the binding as you were feeding it to the binder.

Bias binding is most likely stretch more than the item it is being applied to.

Practice with like products before a new project to test the stitch length, presser foot pressure (if the machine has this feature) as well as thread and fabrics.

------
I dont give them Hell, I just tell the truth about them and they think its Hell. Harry Truman

"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

Mufffet
starstarstarstar
Mufffet  Friend of PR
Intermediate
VT USA
Member since 8/14/05
Posts: 10815
Send Message

      



In reply to allorache <<
thumbsup 1 member likes this.


Date: 2/18/13 10:49 AM

You should feel great that it worked! I have had two binder feet for two different machines and cannot get a good result with anything other than the old fashioned way anyway - it was frustrating - good for you and I bet you soon get a great application!

------
"Be kind whenever possible. It is always possible."
--Dalai Lama

I have sewing machines

Skittl1321
star
Skittl1321
Advanced Beginner
IA USA
Member since 9/9/07
Posts: 1110
Send Message

      



Date: 2/18/13 10:50 AM

I'll just say that these feet take a lot of practice.

Good luck.

Pj3g
star
Pj3g  Friend of PR
Intermediate
WI USA
Member since 2/14/11
Posts: 657
Send Message

      



In reply to allorache <<
thumbsup 2 members like this.


Date: 2/18/13 1:09 PM

I love presser feet! However, that bias binding foot along with the roll hemmer are 2 that just peeve me. I don't use them anymore.

------
Thank you Lord for my Mother who taught me the joy of sewing, for my Father who encouraged my sewing, for the talent You gave me to sew, and for all the special people in my life to sew for.

Mufffet
starstarstarstar
Mufffet  Friend of PR
Intermediate
VT USA
Member since 8/14/05
Posts: 10815
Send Message

      



In reply to Pj3g <<
thumbsup 2 members like this.


Date: 2/18/13 1:12 PM

AMEN to that, although loads of people love both....I lack the skill to use them, or am just too set in my ways.Nice feet though - they LOOK like they should work...

------
"Be kind whenever possible. It is always possible."
--Dalai Lama

I have sewing machines

beauturbo
beauturbo
Advanced
CA USA
Member since 5/2/09
Posts: 3332
Send Message

      



In reply to allorache <<
thumbsup 1 member likes this.


Date: 2/18/13 1:21 PM

The idea of even getting the bias tape on there, if not using any kind of special foot, and only sewing one side of it, then turning and slip stitching down the other side by hand, if you have actual tight curves or corners, is still to get that tight curve or metered corner pressed into the tape, and steamed and molded into it and formed, (if it's cotton) before even trying to fit the curve. Which does mean you need more length of tape and bias tape fabric around outer curves and less on inner ones.

Of course you can't do that, all that easy or great, or even the same way at all, if the tape is in some kind of sewing foot attachment, just feeding off a roll or such instead. Unless you got very adept with your fingers on it at the same time probably. So I think those attachments might be O.K. to use for tape for something even with curves, if more like a pot holder, or some home dec thing, if you are not all that picky right there, but if you want it to look perfect on more a dress or such, just not so much at all.

PattiAnnJ
star
PattiAnnJ
Advanced
OH USA
Member since 12/3/06
Posts: 7267
Send Message

      
thumbsup 2 members like this.



Date: 2/18/13 3:55 PM

More tips

------
I dont give them Hell, I just tell the truth about them and they think its Hell. Harry Truman

"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

Pj3g
star
Pj3g  Friend of PR
Intermediate
WI USA
Member since 2/14/11
Posts: 657
Send Message

      



In reply to Mufffet <<
thumbsup 1 member likes this.


Date: 2/18/13 8:18 PM

Quote: Mufffet
AMEN to that, although loads of people love both....I lack the skill to use them, or am just too set in my ways.Nice feet though - they LOOK like they should work...

Mufffet, you are so funny! The binder foot does LOOK like it should work and that's why I paid good money for it! Dang thing--all it gave me was high blood pressure.

I sewed on 7 yards of binding yesterday. I made one piece aprons for my GC so the binding had to go around neck and arm openings and around the whole edge which is all curves too. It's like Beauturbo said, if you want it to look nice you press in curves and sew it on one side at a time. No hand sewing the opposite side though as these are aprons for my GC--they're going to get dirty hands wiped on them.

The rolled hemmer foot seems to be included with many sewing machines. I think they give them away because nobody would ever buy one. A few years ago I said to myself....I am going to learn to use it. So I cut an old sheet into strips and practiced for hours using that foot. Everytime I thought I had it mastered I'd get a spot on that hem that was screwed up. So that's when I decided to not ever use it again!!!!

------
Thank you Lord for my Mother who taught me the joy of sewing, for my Father who encouraged my sewing, for the talent You gave me to sew, and for all the special people in my life to sew for.

diane s
star
diane s  Friend of PR
Intermediate
OR USA
Member since 8/24/02
Posts: 4710
Send Message

      



Date: 2/18/13 10:30 PM

Is the the foot that folds the bias too, or the foot that holds the prefolded bias.

------
My grandmother taught me to sew when I was 10, and I've been sewing ever since.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Beginner's Forum >> How to use a bias tape foot?

 
adv. search»
pattern | machine | member
        
Fit the Tee to a T
Fit the Tee to a T

Register

Sew a Designer Unlined Jacket
Sew a Designer Unlined Jacket

Register

New Look 6150

photo
by: Heatherriq...

Review
Islander Sewing Systems Men's Easy Shirt Pattern

Islander Sewing Systems Men's Easy Shirt Pattern

Buy Now
SewBaby More Blankie Buddies pattern Pattern

SewBaby More Blankie Buddies pattern Pattern

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.