Please LOGIN or Join PatternReview

Go to Page: 1 of 1

Janome Coverpro binder sizes
rubbecca Advanced Beginner CA USA Member since 2/25/08 Posts: 54	Login to reply to this post Like this post Date: 2/24/13 5:05 PM I'm a little confused about the binder sizes for the Janome Coverpro. It says you can make bindings from: 32mm - 8mm or 50mm - 15mm I want the one that can make the finished size around 3/8". Would that be the 32 mm - 8 mm? ------ Janome Sewist 509 Janome DC 5100 Janome MyLock 644D Janome CoverPro 1000CP
Skye   Intermediate NEW ZEALAND Member since 8/24/02 Posts: 1631	Login to reply to this post In reply to rubbecca << Like this post Date: 2/24/13 6:19 PM The Janome binders are both B binders - that means the fold both edges of the fabric. A binders only fold the top of the binding and these can be useful when using thicker fabrics. to answer yout question the 8mm is approx 1/3" and the 15mm 2/3". I have bought some A binders from Sharp Sewing on Ebay - dont expect speedy replies to any queries, however having said that when I have ordered my orders have arrived in good time and the prices are good. I bought 3 binders whcih worked out with postage to be 60% of what one Janome binder would have cost from my local dealer ( I live in New Zealand ) ------ Wellington, NZ

Go to Page: 1 of 1

Please LOGIN or Join PatternReview

Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it.