SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
Bernina
Bernina

Forum > Sewing Machines > Brother 1250D thread getting material stuck to throat plate ( Moderated by Sharon1952, EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Brother 1250D thread getting material stuck to throat plate
I have unscrewed and cleaned out area repeatedly
Sewcial Dancer
Sewcial Dancer  Friend of PR
New Jersey USA
Member since 11/10/10
Posts: 56
Skill: Beginner
Send Message

      



Date: 7/28/13 5:46 PM

So I guess I have to drop the machine off to the dealer for service again. I am a little bummed, since it's a bit out of my way and I have not been able to get in the mood to finish window treatments I started in the spring since it's summer. I think the sharp thing that juts out over the bobbin area is to blame. Perhaps it's bent or something. It may have gotten messed up last time I tried to do some embroidering, and the machine seemed to be eating the material, even with stabilizer. It seems that the bobbin thread works fine, and that it is the top thread that is getting cut and shredded underneath. Does this sound familiar?

------
Singer 221, 403A, 9020 10 stitch
Brother 1250D
Juki MO-644D

PattiAnnJ
star
PattiAnnJ
Ohio USA
Member since 12/3/06
Posts: 8001
Skill: Advanced
Send Message

      



Date: 7/28/13 11:42 PM

Not sure. Are you sewing or embroidering?




-- Edited on 7/28/13 11:46 PM --

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

"Isnít it a shame in todayís world you canít tell the truth? If you tell the truth youíre abrasive. If you lie youíre charming." - Bob Huggins/College Basket Ball Coach

sew4grands
star
sew4grands  Friend of PR
Member since 2/23/09
Posts: 333
Skill: Intermediate
Body Type:
Send Message

      



Date: 7/29/13 9:32 AM

I sew on 4 Brother machines and have never had this problem

------
Nancy B.
I sew with 4 Brothers and a Featherweight
Babylock Serger

Karen31
star
Karen31  Friend of PR
USA
Member since 1/25/09
Posts: 1378
Skill: Advanced
Send Message

      



Date: 7/29/13 10:21 AM

Sometimes if the bobbin case is not re-inserted and seated properly it can cause problems, more typically with thread, though when I've had it happen the thread became such a mess (i.e. top thread wrapping around in bobbin area, primarily in embroidery mode) the entanglement did cause the fabric to be "eaten". It was kind of a joke when I had the tech look at it and he showed me I hadn't gotten it all the way back in correctly. Because I do it all the time. Because I work there! It wasn't a matter of not knowing how to put it in - but I have had customers have same issue - but I was switching around with different contacts and glasses trying to hone in on a vision issue and I couldn't SEE what I was doing properly! Hopefully that's all it is!

------
Karen

Marie367
Marie367  Friend of PR
Ohio USA
Member since 5/28/11
Posts: 3278
Skill: Intermediate
Send Message

      



In reply to Sewcial Dancer <<


Date: 7/29/13 10:34 AM

This may not help at all as maybe something is out of alignment or bent or something. However, every time I have a thread nest there is something wrong with the needle thread. I had my machine eat fabric this am. The first thing I did was take the bobbin out and clean everything (it is a bit sensitive to dust etc in the bobbin case). Then I changed the needle and rethreaded everything. No more eating of fabric. I don't know how often you change your needle or match needle to fabric but most times thread nests and the eating of fabric is due to needles and top thread and nothing to do with the bobbin. I also lightened the foot pressure and lengthen the stitch a little. I hope the fix for you is something simple!

sew2006
star
sew2006
Ontario CANADA
Member since 6/24/06
Posts: 2218
Skill: Advanced
Send Message

      



In reply to Sewcial Dancer <<


Date: 7/29/13 10:35 AM

Can you post a pic with the plate taken off the machine? The sharp thing that juts out over the bobbincase could be the thread cutter not properly retracting back after it was used last. Can't be sure without a picture.

------
Janome10001, Babylock ESG3, Brother ULT 2001, White 634D serger, Pfaff 1472, Singer featherweight, Singer 14T957Dc, Bernina FunLock 009DCC coverlock, Brother PQ1500S, Janome CP900.

beauturbo
beauturbo
California USA
Member since 5/2/09
Posts: 4141
Skill: Advanced
Send Message

      



Date: 7/29/13 2:44 PM

If it does not happen in regular garment sewing, but only while embroidering and only with that one design, it can easy be just even your embroidery design (s). Too many tight, small stitches, all piled up on top of each other, too close together, or in too many layers, creates a mess, and will create thread tangles, loopies, shred thread, and start breaking needles, and even try to pull your fabric down the stitch plate hole.

Just like trying to sew in one place too long, without feed dogs moving, non hoop embroidery would do the same thing.

I know that, because I have embroidery software, and in any of them I can very quickly do that even on purpose, that would cause that to happen with any machine, just anyplace. Would I do that on purpose, of course not, but accidents can happen in an embroidery design, and every one whom makes some, just does it slightly different.
-- Edited on 7/29/13 2:45 PM --

Sewcial Dancer
Sewcial Dancer  Friend of PR
New Jersey USA
Member since 11/10/10
Posts: 56
Skill: Beginner
Send Message

      



Date: 7/29/13 11:21 PM

I am out of town but I appreciate everyone's input and I will post a picture in a few days. Thanks so much for your replies!

------
Singer 221, 403A, 9020 10 stitch
Brother 1250D
Juki MO-644D

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Sewing Machines >> Brother 1250D thread getting material stuck to throat plate

Merchants on PR

Patterns from the Past


vintage sewing patterns
Deals!

Reconstructing History


Historical Patterns
Web site

Nature's Fabrics


Natural & Organic Fabrics
Deals!

Elliott Berman Textiles


Fabrics for Greater Ideas
Deals!

Style Arc sewing dress patterns


Patterns That Fit
Web site

 
adv. search»
pattern | machine | member
        
Online Class
Fit the Tee to a T
Fit the Tee to a T

Class Details

Online Class
Serging Ahead with your 5 Thread Serger
Serging Ahead with your 5 Thread Serger

Class Details

Burda 9516

photo
by: jenleeC

Review
Victory Lola Paper Pattern

Victory Lola Paper Pattern

Pattern Details
Christine Jonson Fitted Jacket

Christine Jonson Fitted Jacket

Pattern Details
Simplicity 2588

photo
by: thequirkyp...

Review

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2015 PatternReview.com® , OSATech, Inc. All rights reserved.