SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
PatternReview.com
PatternReview.com

Forum > Quilters' Corner > I goofed ( Moderated by Sharon1952)

Please LOGIN or Join PatternReview
Go to Page:
I goofed
Learn To Sew
star
Learn To Sew  Friend of PR
Advanced Beginner
Member since 4/12/05
Posts: 11736
Send Message

      



Date: 8/29/13 6:11 PM

I made a minor mistake when using my Binding Tool and could use some advice. I had not watched the video, as the computer was not turned on. Nor the laptop, and only the main has the video with the updated version of the YouTube demo I wanted.

Anyway, I got out my tool and put it where it should go. Now the fun part. I forgot what to do next and CUT the strip and did not mark it as I was supposed to do.

The other end of the binding strip is not cut, but it is sewn down ready to be trimmed at the proper angle. It is still 9 inches long.

How do I fix this? I imagine it is an easy fix, but my mind has not figured it out yet. Suggestions?

------
Bernina 630, my much loved main machine
Bernina embroidery module
Pfaff 2036 my back up & travel machine
Babylock Molly, mechanical
Bernina 1200DA serger
Unique Sewing Cabinet 450L

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7445
Send Message

      



In reply to Learn To Sew <<
thumbsup 1 member likes this.


Date: 8/29/13 11:22 PM

If you have an excess at least the width of the binding, you do not need a tool. Place the ends at a right angle and stitch from the upper left edge to the lower right edge then trim away the excess. Pin first so you can check before sewing.

This should help you better understand the method.




-- Edited on 8/30/13 11:16 AM --

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

HDWen
star
HDWen  Friend of PR
Advanced Beginner
Arizona USA
Member since 12/26/11
Posts: 2273
Send Message

      



In reply to Learn To Sew <<
thumbsup 1 member likes this.


Date: 8/30/13 2:48 AM

Quote: Learn To Sew
I made a minor mistake when using my Binding Tool and could use some advice. I had not watched the video, as the computer was not turned on. Nor the laptop, and only the main has the video with the updated version of the YouTube demo I wanted.



Anyway, I got out my tool and put it where it should go. Now the fun part. I forgot what to do next and CUT the strip and did not mark it as I was supposed to do.



The other end of the binding strip is not cut, but it is sewn down ready to be trimmed at the proper angle. It is still 9 inches long.



How do I fix this? I imagine it is an easy fix, but my mind has not figured it out yet. Suggestions?

Yes, that is the way I do my binding too!!

Except I really like to sew the back on first... as I come around to the long tail left -- then I take out a few stitches (if I have to) of the beginning... turn them and make the 45 angle and sew just like you do when making the binding -- Measuring first -- Pin and check then cut off excess and finish sewing down.

Because I do the back first, I don't have to worry when I sew the front IF I am "catching" the back sewing that down!! So I use the fancy deco stitches and that is good enough for me :-)

Oh I like how that video explains this too!

Debbie

------
I have a great enthusium for sewing, but lack talent to be great.

2013

Learn To Sew
star
Learn To Sew  Friend of PR
Advanced Beginner
Member since 4/12/05
Posts: 11736
Send Message

      



In reply to PattiAnnJ <<
thumbsup 1 member likes this.


Date: 8/30/13 10:59 AM

Thank you. I know it is not a hard problem to fix, and I have been thinking of how to fix it. This should work well for me. Next time, I'll remember to jus make a mark and not cut the fabric. Thanks again.

------
Bernina 630, my much loved main machine
Bernina embroidery module
Pfaff 2036 my back up & travel machine
Babylock Molly, mechanical
Bernina 1200DA serger
Unique Sewing Cabinet 450L

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Quilters' Corner >> I goofed

 
adv. search»
pattern | machine | member
        
10 Clever Techniques To Help You Sew Like a Pro
10 Clever Techniques To Help You Sew Like a Pro

Register

Create a Jacket Muslin
Create a Jacket Muslin

Register

MariaDenmark 101

photo
by: House of P...

Review
SewBaby Blankie Buddies Pattern

SewBaby Blankie Buddies Pattern

Buy Now
Victoria Jones Collection Men's Classic Hawaiian Businessman's Aloha Shirt

Victoria Jones Collection Men's Classic Hawaiian Businessman's Aloha Shirt

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.