SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Forum > Machine Embroidery > Stabilizer leaves "Whiskers" ( Moderated by Pyrose)

Please LOGIN or Join PatternReview
Go to Page:
Stabilizer leaves "Whiskers"
after tearing it off.
lca
star
lca  Friend of PR
Intermediate
Colorado USA
Member since 6/4/07
Posts: 643
online now
Send Message

      



Date: 9/23/13 1:41 PM

I hooped some tear away stabilizer (sulky brand) and used an in the hoop design that used a satin stitch to finish an edging. There were paper whiskers left behind after tearing away the stabilizer making it too ugly to give as a gift. Does anyone know of a different stabilizer that does not do this or another technique?

Thank you.

diane s
star
diane s  Friend of PR
Intermediate
Oregon USA
Member since 8/24/02
Posts: 4844
Send Message

      



Subject: Stabilizer leaves Whiskers Date: 9/23/13 8:58 PM

Was the stabilizer on the front of the design or on the wrong side?

------
My grandmother taught me to sew when I was 10, and I've been sewing ever since.

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7475
Send Message

      



In reply to lca <<


Date: 9/23/13 11:58 PM

I clean up with the heat of a craft iron.

ETA: I have trimmed the best I could without nipping the stitching and then gone over the satin stitching on the sewing machine with the same embroidery thread in the bobbin as well as for the top thread. The stitch length does not have to be as close as the statin stitch.

You can also use a sharpie in the same color to camouflage the whiskers.

Here are two brands that wash away and are strong enough for the stabilzing the base (not a topper).




-- Edited on 9/24/13 11:47 AM --

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

arianamaniacs
starstarstarstar
arianamaniacs  Friend of PR
Advanced
International AUSTRIA
Member since 6/11/04
Posts: 1278
Send Message

      



Subject: Stabilizer leaves Whiskers Date: 9/24/13 2:36 AM

I'd try what Diane says - the tear-away stabilizer should be on the wrong side of the fabric.

quiltingwolf
star
quiltingwolf
Intermediate
Member since 12/15/02
Posts: 6680
Send Message

      



In reply to lca <<


Date: 9/24/13 11:03 AM

Yes except for soluble stabilizer it should be on the back of the design.

------
quiltingwolf.blogspot.com

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7475
Send Message

      



Subject: Stabilizer leaves Whiskers Date: 9/24/13 11:16 AM

No one said the stabilizer was on the top. It was hooped and then the fabric was placed on the top for an applique.

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

lca
star
lca  Friend of PR
Intermediate
Colorado USA
Member since 6/4/07
Posts: 643
online now
Send Message

      



In reply to diane s <<


Date: 9/24/13 1:28 PM

This is an in the hoop design and the tear away ended up between two layers beecause you put fabric on both sides of the hooped stabilizer. The tear away stays inside the two layers. I don't like that idea much, but I guess it doesn't hurt anything.

lca
star
lca  Friend of PR
Intermediate
Colorado USA
Member since 6/4/07
Posts: 643
online now
Send Message

      
thumbsup 1 member likes this.



Subject: Stabilizer leaves Whiskers Date: 9/24/13 1:34 PM

I think I am going to try a strong wash away like the ones PattiAnnJ linked too. I just hope the needle doesn't pierce it so that it tears while doing the satin stitch. Also, sometimes I have had a hard time getting all the wash away out. I don't want it to end up feeling starched because it will be left between two layers.

I couldn't find a marker the correct color.

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7475
Send Message

      



In reply to lca <<


Date: 9/24/13 4:41 PM

What are you making that has stabilizer between the layers of fabric?

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

LouisaP
LouisaP
Intermediate
Minnesota USA
Member since 2/27/07
Posts: 414
Send Message

      



Subject: Stabilizer leaves Whiskers Date: 9/26/13 10:53 AM

A few years back, I made the Molly Mine embroidered "purse" which was nothing but in-the-hoop designs. I *hated* the tearaway whiskers! Came up with another process - it takes a bit more time, but it's SO much nicer.

1. Hoop heavy-weight wash-away Solvy.
2. Run the outline stitch.
3. Slip a piece of CUTAWAY stabilizer under your hoop to cover the outline. Now put your applique fabric on the top side. (I like to use a piece of fabric larger than the finished applique, run the outline stitch and then trim, rather than cutting the piece to size and trying to fiddle around with getting it to line up perfectly)
4. Run the outline stitch again (you'll need to back up the stitching order to run it a second time) Now you've got the applique fabric on top, the Solvy in the middle, and the cutaway on the backside, all locked in place.
5. Take your hoop off the machine. Trim both the applique fabric and the cutaway fabric back to the running stitch.
6. Put the hoop back on the machine, and proceed, running the zigzag stitch to lock down the edges of both the applque and the cutaway backing.

This way, you get the stabilizer and stiffening inside of the ITH piece, without the whiskers. It will just pop out of the Solvy, and you can use a wet towel to wipe away any Solvy edges.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Machine Embroidery >> Stabilizer leaves "Whiskers"

 
adv. search»
pattern | machine | member
        
10 Clever Techniques To Help You Sew Like a Pro
10 Clever Techniques To Help You Sew Like a Pro

Register

The Technique of Underlining Garments
The Technique of Underlining Garments

Register

Vogue Patterns 7608

photo
by: Mobycat

Review
Christine Jonson Cuff Pant

Christine Jonson Cuff Pant

Buy Now
Paradiso Designs Be Green Market Bag Pattern

Paradiso Designs Be Green Market Bag Pattern

Buy Now
New Look 6030

photo
by: twilltape

Review

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.