SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Forum > Machine Embroidery > brother se400 help....automatic threader ( Moderated by Pyrose)

Please LOGIN or Join PatternReview
Go to Page:
brother se400 help....automatic threader
kbusby
kbusby
Member since 2/5/14
Posts: 2
Send Message

      
thumbsup 1 member likes this.



Date: 2/5/14 4:13 PM

i had to remove the needle plate to unjam thread after my thread got caught while embroidering. I had to take the needle off to do it. I put the needle back on, made sure it hit the needle stopper. I screwed it back on. Now the needle will not thread. Any idea on what to do? Thanks.

dmh1
dmh1  Friend of PR
Intermediate
NC USA
Member since 1/13/13
Posts: 659
Send Message

      
thumbsup 1 member likes this.



Date: 2/5/14 4:31 PM

Have you tried powering the machine off and then back on? I was having a similar problem on a machine and realized I had inadvertently moved the thing (needle bar? doohickey? thing?) that the needle shaft goes into. When I turned the power off and on the machine reset it and the auto threader worked after that. Just a thought!

------
Michelle

SM: Janome DC2013 & Singer Futura Quintet
Serger: Janome Magnolia 7034D
Coverstitch: Singer 14T968DC

kbusby
kbusby
Member since 2/5/14
Posts: 2
Send Message

      
thumbsup 1 member likes this.



Date: 2/5/14 5:48 PM

yes i have powered it off and then tried again with no luck. i shall try again. thanks.

MartiP
MartiP  Friend of PR
Intermediate
Member since 9/5/12
Posts: 587
Send Message

      
thumbsup 1 member likes this.



Date: 2/5/14 8:00 PM

Be sure the needle is all the way up where it should be, otherwise the needle threader will not hit it where it should. Also, is it possible that he part that goes through the needle hole became bent?

------
MartiP

Ruckertt's Law; There is nothing so small that it can't be blown out of proportion.

Bernina 1230 Bernette 007D
Brother CS6000i Brother 2340 CV
New Home L372
Singer 221K (off white)
U.S Blindstitch, Model SL 718/2D
Simplicity SE2
Brother 700II

SandiMacD
star
SandiMacD  Friend of PR
Intermediate
FL
Member since 2/8/09
Posts: 2564
Send Message

      
thumbsup 1 member likes this.



Date: 2/6/14 3:55 AM

I am guessing the thread jam must have thrown off the position of the needle somehow. But I have no other suggetions on how to fix it.

------
sewing brings joy and meaning to my life...

bestgrammy
star
bestgrammy
OR USA
Member since 8/29/06
Posts: 3556
Send Message

      



In reply to kbusby <<


Date: 2/6/14 4:04 AM

Quote: kbusby
I put the needle back on, made sure it hit the needle stopper.

Anytime there is a jam...the needle should be replaced. It could be ever so slightly bent.
Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Machine Embroidery >> brother se400 help....automatic threader

Merchants on PR

Budo Bear Designs


Asian Designs
Web site

Patterns from the Past


vintage sewing patterns
Deals!

Reconstructing History


Reconstructing History
Web site

Elliott Berman Textiles


Fabrics for Greater Ideas
Deals!

Gwyn Hug


Fabric Shopping Help!
Deals!

 
adv. search»
pattern | machine | member
        
Beginners Guide to Dyeing Fabrics
Beginners Guide to Dyeing Fabrics

Register

Sewing with Slippery & Drapey Fabrics
Sewing with Slippery & Drapey Fabrics

Register

McCall's 6571

photo
by: loti

Review
PerfectFuse Light Black

PerfectFuse Light Black

Buy Now
Jamie Christina Mission Maxi Pattern (JC312MM)

Jamie Christina Mission Maxi Pattern (JC312MM)

Buy Now
Simplicity 1915

photo
by: halleyscom...

Review

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.