Men's pull-over tops are designed for heavy stretch knit fabrics with 25% stretch across the grain. We suggest using PolarfleeceŽ or blanket fleece. We use swimwear fabric for the contrast bindings. The neckline, bottom edge and sleeves can be finished with contrast bindings. View B options include a hood with a draw string, patch pockets and a hemmed bottom edge and sleeves.

The very close fitting leggings are designed for fabrics with spandex-LycraŽ and with the greatest degree of stretch on lengthwise grain. They have an elastic waist, no side seams and the bottom leg edges are finished with bindings from swimwear fabric.

Size

S

M

L

XL

XXL

Material required: Fabric requirement allows for nap, one-way design or shading.
Extra fabric may be needed to match design or for shrinkage.

Leggings

1 3/8 (1.30)

1 3/8 (1.30)

1 1/2 (1.40)

1 7/8 (1.75)

2 1/4 (2.10)

yd (m)

Top View A

1 5/8 (1.50)

1 5/8 (1.50)

1 3/4 (1.60)

1 3/4 (1.60)

2 (1.85)

yd (m)

Top View B

2 1/4 (2.10)

2 1/4 (2.10)

2 3/8 (2.20)

2 3/8 (2.20)

2 1/2 (2.30)

yd (m)

Swimwear Fabric for Bindings 14" (35 cm) Wide (minimum width)

Top View A

3/4 (0.70)

3/4 (0.70)

7/8 (0.80)

7/8 (0.80)

7/8 (0.80)

yd (m)

Swimwear Fabric for Bindings 6" (15 cm) Wide (minimum width)

Leggings

3/8 (0.35)

1/2 (0.50)

1/2 (0.50)

1/2 (0.50)

1/2 (0.50)

yd (m)

Notions: Thread. TOP VIEW A & B: Scrap piece of fusible interfacings. TOP VIEW B: One drawstring. LEGGINGS: 1" (2.5 cm) wide elastic – 1 yd (0.95 m) for sizes S-M-L-XL; 11/8 yd (1 m) for size XXL.