Please LOGIN or Join PatternReview

Go to Page: 1 of 1

Connecting BSR to Bernina 200e Help 200 with BSR or just 200 and BSR
coracora Beginner Member since 11/26/10 Posts: 6	Login to reply to this post Like this post Date: 12/18/10 2:51 PM Does anyone have an Artistia 200 upgraded to a 730? I purchased a used 200e with BSR. Memory has been upgraded and BSR software shows in setup info, but I can't determine where to plug in the bsr. I asked seller, who says she never actually used the bsr on the machine. Is there an additional part that should have been added to the machine.? BSR booklet says attach cable into the box on back of head frame, connect cable of BSR box into connection of the embrodery module on the right side.
SewBusy63 Advanced IA USA Member since 12/10/07 Posts: 3186	Login to reply to this post In reply to coracora Like this post Date: 12/18/10 3:06 PM Try looking under the area where the needle is located. The connection port might be there (that's where it is on the 440 and 635). The BSR won't connect into the embroidery connection on the side of the machine. -- Edited on 12/18/10 3:13 PM -- ------ ~Diana~ ♥ Bernina 830E ♥ Bernina 1150MDA serger ✝The Lord is my Light and my Salvation: whom shall I fear? The Lord is the strength of my life; of whom shall I be afraid? Psalm 27:1✝
JanyceR   Advanced CO USA Member since 2/3/07 Posts: 1006	Login to reply to this post In reply to coracora Like this post Date: 12/18/10 6:04 PM Since the BSR is an add-on to the 200, I believe that you do have to plug the cable into the embroidery module connection. If you have a plexi-glass table or have your machine in a cabinet with a plexi-glass insert it will reflect the connection that is in back of the needle bar. Easier than trying to turn your head upside down to find it! Or stick a hand mirror on the machine bed. Good luck!

Go to Page: 1 of 1

Please LOGIN or Join PatternReview

Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it.