Please LOGIN or Join PatternReview

Go to Page: 1 of 22 of 2

High Tech Warmth All new to me
solosmocker Advanced NY USA Member since 1/23/06 Posts: 1256	Login to reply to this post Like this post Date: 9/23/12 12:34 PM I recently purchased an exquisite cotton velveteen, washable, that I would like to make into a jacket. I am considering Marcy Tilton's Vogue 8676Vogue 8676, a really simple design so the fabric will stand out. It is very cold up here and I want to make this a winter jacket. I know the options of using Kasha, lining with flannel, quilted fabric (too bulky), etc. What I am wondering, is there a high tech fabric that will be lightweight and keep me very warm, without adding too much bulk? I looked at the Rain Shed website and there are so many of these that I don't know the difference between one and another. Any suggestions? Today's skiwear is formfitting and light. That is the type of insulation I would like. I am overwhelmed by options whose names mean nothing to me. Thanks for any help offered. ------ http://lasewist.blogspot.com/
hpsauce Intermediate ON CANADA Member since 4/3/09 Posts: 90	Login to reply to this post 2 members like this. Date: 9/23/12 4:07 PM Thinsulate...there are different weights for varying warmth available . ------ Island Couture http://islandcouture.blogspot.ca/
clt3 Intermediate OH USA Member since 2/6/06 Posts: 770	Login to reply to this post 1 member likes this. Date: 9/23/12 4:24 PM I was going to say the same thing. Available here: Vogue Fabrics thinsulate ------ Singer 66-16. Singer 600e, Kenmore 158.1913 , Viking 1100, Brother 4000D, Brother Quattro, Bernina 930, White 634DE, Babylock Evolve, 2 Featherweights ,Pfaff Creative Performance,Janome Coverpro 1000CPX
goodworks1   Advanced IL USA Member since 7/19/03 Posts: 3298	Login to reply to this post 1 member likes this. Date: 9/23/12 6:54 PM Order swatches from Rain Shed (or Outdoor Wilderness or similar) -- it's the best way to figure out what you need. Also, the online stores have quite good online instructions and help info on their insulations. I once made my daughter a winter coat (from a KwikSew windbreaker pattern) that was cotton corduroy on the outer layer. I layered that with a lightweight woven ripstop-type nylon to block the wind, then a 'raw' thinsulate (without the covering...my sister gave me the remnants from a jacket she'd made and I pieced them together), then another layer of something similar to the nylon. Then I quilted a cotton lining to coordinate with the corduroy. It was extremely warm even when outside for several hours. And has lasted through several children's use. Last I heard it had gained a fur edging on the hood and cuffs to cover the wear on the edges. I think you could skip the inside layer of nylon and the quilting of the lining if you used the covered thinsulate, but it's a little stiffer in the final garment than the uncovered stuff. (Warning: the uncovered thinsulate is sticky, rather like a spider-web.) But I determined what insulation to use from samples/swatches I ordered online. -- Edited on 9/23/12 6:56 PM -- ------ blog: goodworks1.wordpress.com
Sharon1952   Advanced MA USA Member since 7/1/08 Posts: 2643 Board Moderator	Login to reply to this post Like this post Date: 9/23/12 8:29 PM You can check out the Malden Mills site at: http://www.milldirecttextiles.com/ I buy from them and have used it for coats, linings, leggings, mittens and more. There are many weights and configurations. ------ Sewing: A creative mess is better than tidy idleness. ~Author Unknown
solosmocker Advanced NY USA Member since 1/23/06 Posts: 1256	Login to reply to this post Like this post Date: 9/24/12 9:21 PM Thank you, everyone, for your input. It has been very helpful. ------ http://lasewist.blogspot.com/
hpsauce Intermediate ON CANADA Member since 4/3/09 Posts: 90	Login to reply to this post Like this post Date: 9/25/12 6:19 AM In the outdoor industry, outerwear is never mde from cotton (wet ccotton kills, as they say) due to the fact that it retains moisture, causing the body temps to lower. In an urban setting this would be not so important, BUT wet cotton will still make you cold. You may want to insert a membrane under the outer fabric to negate that effect. I believe that Rockywoods may have in the past carried waterproof membrane fabrics, if my memory serves. Not sure about currently though. ------ Island Couture http://islandcouture.blogspot.ca/
hpsauce Intermediate ON CANADA Member since 4/3/09 Posts: 90	Login to reply to this post Like this post Date: 9/25/12 6:25 AM Here it is Waterproof breathable liner fabric ------ Island Couture http://islandcouture.blogspot.ca/
annakeeton   Advanced NY USA Member since 1/4/09 Posts: 176	Login to reply to this post Like this post Date: 9/25/12 7:10 AM I recommend ordering the Insulation and Quilt/Pile swatches from The Rain Shed. They also sell heavier cotton fabrics and might be able to recommend something specifically for your project. Seattle Fabrics is another outdoor fabric source.
KathySews   Advanced Beginner MI USA Member since 10/1/06 Posts: 2892	Login to reply to this post Like this post Date: 9/25/12 8:50 AM great information. I am making a coat and looking for warmth also. Thanks

Go to Page: 1 of 22 of 2

Please LOGIN or Join PatternReview

Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it.