SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
Fashion Fabrics Club
Fashion Fabrics Club

Forum > Sewing Machines > Help, I dropped a screw in my sewing machine ( Moderated by Sharon1952, EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Help, I dropped a screw in my sewing machine
sewing machine repair, problems, tension
LittleBlueDress
LittleBlueDress
Beginner
Member since 2/7/13
Posts: 4
Send Message

      



Date: 2/7/13 12:34 PM

I was having some problems with the tension so I was adjusting the bobbin tension screw, and loosened it so much that it fell into the machine. I can't hear it rattling anymore so it's stuck. Is it safe to remove the bobbin case or take out other components to look for it? Should I just take it in for repair? I can buy a new screw but I am worried about this other screw damaging the machine.

I have a Singer Stylist 418, attached to a nice wood cabinet. I do have a manual and I realize now that I simply had the machine threaded wrong and should never have loosened the screw. Also, how much should I expect to pay for repair, or for cleaning, oiling, servicing, and readjusting? Any suggestions are much appreciated.

2mulie
2mulie  Friend of PR
Intermediate
Missouri USA
Member since 10/17/07
Posts: 278
Send Message

      



In reply to LittleBlueDress <<


Date: 2/7/13 1:00 PM

If you are still under warranty, I would bring it in. If not, call them for a price...they are all over the place with $$, and get the name of the person who gives you the quote.

If you are feeling handy, it is possible to take off the throat plate and the bobbin case (some are removable and exchangeable anyway), do so, and if you can get it out of the cabinet, turn it upside-down and see if you can't shake it out. Been there, and still had to take my machine to the dealer because it wouldn't (broken needle) come out.

Good luck.

SewRaeMe

SewRaeMe
Advanced Beginner
Member since 3/20/08
Posts: 287
Send Message

      



Date: 2/7/13 1:09 PM

You could try checking your manual, it may show you how to take the bobbin casing out and remove the stitch plate etc.

------
Formerly The Canadian

LittleBlueDress
LittleBlueDress
Beginner
Member since 2/7/13
Posts: 4
Send Message

      



Date: 2/7/13 1:27 PM

Thanks everyone. My machine is vintage, so no warranty. I was just worried about damaging the machine or the tension by removing the bobbin case. Has anyone here ever done this?

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7388
Send Message

      



Date: 2/7/13 3:25 PM

You can remove the bottom for cleaning. That may be where the screw landed.

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

GothDom
star
GothDom  Friend of PR
Advanced
Member since 3/24/10
Posts: 1949
Send Message

      



Date: 2/7/13 4:22 PM

You should be able to take it apart with little issue.
Just remember where things came from.
Those machines are pretty hard to mess up.

------
http://www.acdc-vintage.com
This one, that one, and a bunch of other ones!
(though the herd is getting more streamlined)

brendaj
brendaj
Member since 8/9/07
Posts: 138
Send Message

      



Date: 2/7/13 4:24 PM

Been there, done that. I was ready to take the machine apart and decided to try one more thing. I carefully held the machine upside down and gently shook and rotated the machine. The screw fell out. I was lucky, I know.
brenda in MI

brendaj
brendaj
Member since 8/9/07
Posts: 138
Send Message

      



Date: 2/7/13 4:24 PM

Been there, done that. I was ready to take the machine apart and decided to try one more thing. I carefully held the machine upside down and gently shook and rotated the machine. The screw fell out. I was lucky, I know.
brenda in MI

AdaH
star
AdaH  Friend of PR
Intermediate
Iowa USA
Member since 11/21/09
Posts: 2483
Send Message

      
thumbsup 2 members like this.



Date: 2/7/13 6:45 PM

My problem wasn't a screw but a pin. You know those little holes to the right of the needle where you can attach this and that. Well I slid the pin out as I was sewing along and it fell right in one of those holes. It would not come out so I had to take the machine in to have it removed. Now I keep a picec of tape over the holes.

------
Ada

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Sewing Machines >> Help, I dropped a screw in my sewing machine

 
adv. search»
pattern | machine | member
        
Expert Sewing Techniques for Jackets
Expert Sewing Techniques for Jackets

Register

Restyling with Exposed Zippers
Restyling with Exposed Zippers

Register

Vogue Patterns 8539

photo
by: canei

Review
Vogue Patterns 7610

photo
by: Ducky D

Review
Favorite Things The Frayed Jacket Pattern

Favorite Things The Frayed Jacket Pattern

Buy Now
Sewing Workshop West End Top & Pants

Sewing Workshop West End Top & Pants

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.