Please LOGIN or Join PatternReview

Go to Page: 1 of 1

waiting for my Bernina B750QE
cornut Advanced CA USA Member since 10/27/11 Posts: 52	Login to reply to this post 1 member likes this. Date: 2/19/13 10:43 PM I ordered a new 750 in early January and am so excited to get it. BUT....I keep reading about people struggling to get a good 1/4" for piecing(quilting). Since quilts are my main sewing interest right now, it has me worried. I don't remember having a problem while testing the machine at the dealers. Those of you who have this machine....have you had trouble? ------ Theresa
Babe B   Intermediate MA USA Member since 10/4/04 Posts: 263	Login to reply to this post In reply to cornut << 1 member likes this. Date: 2/20/13 8:07 AM First of all, congratulations on purchasing your new 750! Hope you receive it soon. I have not used a 7 Series machine, only saw them demoed at a quilt show or two. However, I did watch the Bernina Webinar yesterday on constructing a "table quilt" - instructor said it covered her small table and that's why she called it that. Anyhow, there were great tips on obtaining that perfect, scant 1/4 inch for piecing using the 7 Series (780 was used in the Webinar), and the #37 foot and dual feed. The Webinar will be available to view on Bernina's website in a couple weeks under the tab, "What's New." You might want to check it out. I'm pretty convinced that piecing on these beauties should not be an issue.
SewBusy63 Advanced IA USA Member since 12/10/07 Posts: 3195	Login to reply to this post In reply to cornut << Like this post Date: 2/20/13 10:36 AM I can piece on my 830 so I am sure the 750 will produce excellent results. ------ ~Diana~ ♥ Bernina 830E ♥ Bernina 1150MDA serger ✝The Lord is my Light and my Salvation: whom shall I fear? The Lord is the strength of my life; of whom shall I be afraid? Psalm 27:1✝
SouthernStitch   Advanced LA USA Member since 8/24/02 Posts: 8205	Login to reply to this post Like this post Date: 2/20/13 12:56 PM Congrats on your new machine! If you don't like using the 37 foot, just put on the 1D foot, and push the needle all the way to the right (or however many clicks it takes). This is what I do on my 9mm machine. True, you cannot use the SS plate, but I've never had a problem. A good sharp needle preventsthe fabric from being eaten. Best of luck with your new beauty! ------ Bernina 730E, 530, and 350PE Singer 221 FW, 403a When life gives you green velvet curtains, make a green velvet dress.

Go to Page: 1 of 1

Please LOGIN or Join PatternReview

Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it.