SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
PatternReview.com
PatternReview.com

Forum > Sewing Machines > Thread Nests Juki F600 ( Moderated by Sharon1952, EleanorSews)

Please LOGIN or Join PatternReview
Go to Page:
Thread Nests Juki F600
Lisabeth60
Lisabeth60
Intermediate
Arizona USA
Member since 6/18/10
Posts: 62
Send Message

      



Date: 4/8/13 1:37 AM

I have had my F600 for a little over a year and love it.
Suddenly, though I'm having a problem where the first few stitches create a tiny thread nest or small loops. After this, the stitch is perfect.

I tried cleaning the bobbin area, changing the needle and retreading 1/2 a dozen times. Occasionally, I can get it to where it doesn't happen, but then it starts again.

Any ideas?? I'd appreciate any help. It drives me a bit nuts although you can't really see it in the finished item.

Lisa

misschris
misschris
AUSTRALIA
Member since 2/3/06
Posts: 1573
Send Message

      



In reply to Lisabeth60 <<


Date: 4/8/13 3:03 AM

If you use the thread cutter and don't hold your thread tail when you start stitching this can happen.

------
chris

Melbourne

Lisabeth60
Lisabeth60
Intermediate
Arizona USA
Member since 6/18/10
Posts: 62
Send Message

      



Date: 4/8/13 3:26 AM

I wonder why it just started happening, but didnt before. That seems like a defect if that's it. I will try holding the thread back tomorrow. Does the type of thread male a difference? Thank you.

Mufffet
starstarstarstar
Mufffet  Friend of PR
Intermediate
Vermont USA
Member since 8/14/05
Posts: 11032
Send Message

      



In reply to Lisabeth60 <<


Date: 4/8/13 2:51 PM

Have you had your machine serviced? If you have sewn a lot and have had it a year, it's probably time for a servicing - you may have a teenie piece of thread caught down in the bobbin area somewhere that you can't see in what we can remove from our machines. Who knows. In any case it will have enough fluffs for a cleaning.

------
"Be kind whenever possible. It is always possible."
--Dalai Lama

I have sewing machines

Lisabeth60
Lisabeth60
Intermediate
Arizona USA
Member since 6/18/10
Posts: 62
Send Message

      



Date: 4/8/13 4:54 PM

Hello, no I haven't taken it in. I haven't used it a whole lot. Even though ive had it a year, i probably have used it 6 times up until now. But I probably will have to take it in...

I tried not using the automatic threader and pulling the threads behind and it made no difference. I still got a small thread nest. Some rows worse than others.

It is only the first 2-3 stitches...

I wonder if it could be the thread. This is 30 wt 100% cotton Coats & Clark machine quilting thread. I had never used it before but thought I would try it..

I saw some others that had this issue and I wondered if they solved it. If nothing I try works, I will take it in.

Thank you!

PattyGee
PattyGee  Friend of PR
Intermediate
Member since 11/12/03
Posts: 765
Send Message

      



In reply to Lisabeth60 <<


Date: 4/9/13 1:05 AM

It could be the thread, change it out and see if it is happening still. If it is probably is something wrong in the threading or perhaps your bobbin has lint in it. HTH.

------
Patty
Bernina 530, Bernina 200e with upgrade 730, BL Enlighten Serger, BL Coverstitch and Juki TL-2010Q.

snuzal
star
snuzal
Intermediate
International NEW ZEALAND
Member since 7/7/07
Posts: 744
Send Message

      



Date: 4/9/13 2:58 AM

it happens on mine too. didn't for the first wee while, but after a while it started doing it.

I am worried about having it serviced, because if I remember rightly when I bought it, the dealer said something about not needing to oil it. And the only dealer is at the other end of the country. Im hoping maybe I can find a repair manual, and give it to the local service tech

------
Check my blog :)
http://snuzalsews.blogspot.com/

Juki Exceed F600, Babylock Imagine, Janome 300E.

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7438
Send Message

      



In reply to Lisabeth60 <<


Date: 4/9/13 10:55 AM

It may well be the thread as the 30wt is thicker than the normal 50wt sewing thread.

With the presser foot down, adjust the tension to a lower number and try again.

You may also need a larger needle.

The lower the thread number the thicker the thread; the higher the needle number the larger the needle.

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

Lisabeth60
Lisabeth60
Intermediate
Arizona USA
Member since 6/18/10
Posts: 62
Send Message

      



Date: 4/9/13 11:06 AM

Thank you. That's interesting about the thread numbers. I didn't know 30 was heavier..
Today I am going to try different thread and I'm hoping that's the issue. I will post here about it. I appreciate everyone's comments.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Sewing Machines >> Thread Nests Juki F600

 
adv. search»
pattern | machine | member
        
The Contemporary Couture Jacket
The Contemporary Couture Jacket

Register

Sew a Designer Unlined Jacket
Sew a Designer Unlined Jacket

Register

Sewing Workshop Urban T-Shirt & Pants Pattern

Sewing Workshop Urban T-Shirt & Pants Pattern

Buy Now
Beginner Sewing Lab 103 - A downloadable Book by Shannon Gifford

Beginner Sewing Lab 103  - A downloadable Book by Shannon Gifford

Buy Now

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.