SIGNUP - FREE Membership and 1 FREE Sewing Lesson
| FAQ | Login
 

Platinum Sponsor
PatternReview.com
PatternReview.com

Forum > Sergers, Coverstitch and Blindhemmers > Serger differential feed ( Moderated by CarolynGM, Deepika)

Please LOGIN or Join PatternReview
Go to Page:
Serger differential feed
Helpful with two flat layers?
gdgtmma
star
gdgtmma
Intermediate
New Mexico USA
Member since 4/16/09
Posts: 78
Send Message

      



Date: 5/1/13 9:58 AM

I've been sewing lots and lots of drapes. On my last group I had 96" long seams and serged the cotton/poly lining to my quilting cotton. I found the top layer of my fabric getting too long in between pins, so had to keep unpinning and let the fabric lay together. Can the differential feed help in a situation like this? I know I can increase the number to help gather the fabric, but I think this would work on both fabrics - not just the top fabric. Thanks!

mgmsrk1
mgmsrk1
Intermediate
Member since 12/16/12
Posts: 179
Send Message

      



In reply to gdgtmma <<


Date: 5/1/13 10:47 AM

That is exactly the kind of situation that differential feed is ment to be used for.

The differential feed controls the speed of the feed between the top and bottom. If one fabric is being stretched the feed should be adjusted until both fabrics feed evenly.

------
1968 Kenmore 158. (AKA The Hulk)
Bernina 230
Janome 6600 (for sale)
Janome 7700
Juki 600
Elna serger
Kenmore serger
Janome 1000 CoverStitch
Juki 8500 Industerial

Doris W. in TN
star
Doris W. in TN  Friend of PR
Intermediate
Tennessee USA
Member since 2/9/04
Posts: 7846
Send Message

      



In reply to gdgtmma <<


Date: 5/1/13 1:29 PM

Based on my own experience, it might help. I always do some testing on strips of fabric. Sometimes I have to do 'taut' serging to get the best results.

PattiAnnJ
star
PattiAnnJ
Advanced
USA
Member since 12/3/06
Posts: 7458
Send Message

      
thumbsup 1 member likes this.



Date: 5/1/13 1:48 PM

Absolutely. Use the DF!



-- Edited on 5/1/13 1:49 PM --

------
"Improvise, adapt and overcome." - Clint Eastwood/Heartbreak Ridge

gdgtmma
star
gdgtmma
Intermediate
New Mexico USA
Member since 4/16/09
Posts: 78
Send Message

      



Date: 5/1/13 2:31 PM

Thank you - that is reassuring (I still have several panels to make). I didn't have long enough pieces of scraps to replicate my issue..... So if my top piece is bigger than my bottom piece, which way should I adjust the differential feed?

biochemistress

biochemistress  Friend of PR
Advanced
Virginia USA
Member since 11/8/05
Posts: 428
Send Message

      
thumbsup 2 members like this.



Date: 5/2/13 7:14 AM

If you can, adjust your foot pressure lower. Sometimes this is all you need.

If it can't be adjusted, I would serge with the longer piece on the bottom, and adjust the differential just a few tics up. This would ever so slightly gather the bottom fabric (which should be the longer piece). I think that works better than trying to adjust the feed to lengthen the smaller piece.

beauturbo
beauturbo
Advanced
California USA
Member since 5/2/09
Posts: 3515
Send Message

      



In reply to gdgtmma <<


Date: 5/2/13 3:50 PM

I think that is what split deferential feed is for too. I like it, and wish all my sewing machines had it too actually. It is going to have the very most effect on the bottom layer of fabric that is actually against those separate moving from each other feed dogs though, that are making the fabric stretch out or condense up by how you set it each time positive or negative. So I would put the layer of fabric (if using two different ones) that I was trying the most to have that effect on, (condense or stretch) down side, against my split feed dogs, just because it would be the layer of fabric that had contact with them. Sometimes it might not matter all that much, but sometimes it really might.

gdgtmma
star
gdgtmma
Intermediate
New Mexico USA
Member since 4/16/09
Posts: 78
Send Message

      



In reply to beauturbo <<


Date: 5/10/13 4:16 PM

Thank you - I really understand it much better now.

Go to Page:
Please LOGIN or Join PatternReview

printable version Printable Version

* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it. Sergers, Coverstitch and Blindhemmers >> Serger differential feed

Merchants on PR

Patterns from the Past


vintage sewing patterns
Deals!

Reconstructing History


Reconstructing History
Web site

Elliott Berman Textiles


Fabrics for Greater Ideas
Deals!

Gwyn Hug


Fabric Shopping Help!
Deals!

Style Arc sewing dress patterns


Patterns That Fit
Web site

 
adv. search»
pattern | machine | member
        
Sew a Designer Unlined Jacket
Sew a Designer Unlined Jacket

Register

Sewing Facings and Developing Facing Patterns
Sewing Facings and Developing Facing Patterns

Register

Butterick 5539

photo
by: chesneykat

Review
Sewn Square One Paper Bag Pant Pattern

Sewn Square One Paper Bag Pant Pattern

Buy Now
Victory Nicola Paper Pattern

Victory Nicola Paper Pattern

Buy Now
Butterick 5791

photo
by: prttynpnk

Review

Conditions of Use | Posting Guidelines | Privacy Policy | Shipping Rates | Returns & Refunds | Contact Us | About | New To PR | Advertising

Copyright © 2014 PatternReview.com® , OSATech, Inc. All rights reserved.