Sponsors
Sponsors
YouTubeVideo (Moderated by Deepika, Sharon1952)
Posted on: 5/22/21 7:15 PM ET
Has anyone watched the How-To on You Tube that used Ban Roll to make small hems. It's very interesting but I don't know how to give you a link. Also, I can't find it anywhere for purchase.
Posted on: 5/22/21 7:20 PM ET
In reply to unger
Try hunting "Ban-Rol". Here's a bit more about its use for narrow hems:
https://www.google.com/amp/s/oliverands.com/community/blog/2014/04/narrow-hem-with-ban-rol.html/amp
https://www.google.com/amp/s/oliverands.com/community/blog/2014/04/narrow-hem-with-ban-rol.html/amp
Minnesota USA
Skill: Advanced
Skill: Advanced
Posted on: 5/22/21 8:00 PM ET
I found it a very tedious process. But then, My sewing machine produces an amazing rolled hem with no muss or fuss.
------
------
Janome Skyline S3 | Singer Quantum Stylist 9985 | Singer Stylist 7258 | Kenmore 1503
Baby Lock Celebrate | Brother 2340CV
My Big 4 Sizing: Medium | Tops 14 | Pants 16 | Skirts 16
My Measurements: 36 HB | 38.5 FB | 33 UB | 32 W | 43 Hip
http://dressmakingdebacles.blogspot.com
Baby Lock Celebrate | Brother 2340CV
My Big 4 Sizing: Medium | Tops 14 | Pants 16 | Skirts 16
My Measurements: 36 HB | 38.5 FB | 33 UB | 32 W | 43 Hip
http://dressmakingdebacles.blogspot.com
Posted on: 5/23/21 0:04 AM ET
In reply to KSmithSews
Yeah, that's always my first question, too: "Did you try your fabric with a narrow hemmer?"
Posted on: 5/23/21 0:11 AM ET
The Ban Roll thing looks cool, but the hem has to be dead straight, no curve. So has limited application.
------
------
Austragirl (Adelaide, South Australia)
Posted on: 5/23/21 0:17 AM ET
In reply to unger
I buy sewing supplies from Wawak
They have great prices and quick shipping. If you want banroll they sell in bulk. I’ve tried the narrow hem foot on my machine without much success so I use the banroll technique all the time now. Maybe I need to revisit the narrow hem foot? But the ban roll technique is pretty fool proof. I like having the extra stability of the banroll in the hem as I’m hemming. It makes it simple to iron the hem crisply and accurately. Really makes the hem look professional. The tedious part is removing the threads of banroll along the entire length of the strip. If you pull too hard they can break and you really do need to pull one thread at a time until you get your hem width. I use a pin to separate each thread and then pull pull pull.
They have great prices and quick shipping. If you want banroll they sell in bulk. I’ve tried the narrow hem foot on my machine without much success so I use the banroll technique all the time now. Maybe I need to revisit the narrow hem foot? But the ban roll technique is pretty fool proof. I like having the extra stability of the banroll in the hem as I’m hemming. It makes it simple to iron the hem crisply and accurately. Really makes the hem look professional. The tedious part is removing the threads of banroll along the entire length of the strip. If you pull too hard they can break and you really do need to pull one thread at a time until you get your hem width. I use a pin to separate each thread and then pull pull pull.
Posted on: 5/23/21 0:24 AM ET
In reply to Jday001
Have you followed Carol Ahles' instructions for narrow hemming? I fought it for months... Carol told me to quit trying to help. She was right.
Posted on: 5/23/21 2:12 AM ET
I often use Kenneth King's method which is the same as the Ban-Rol method except it uses washaway stabilizer instead of Ban-Rol. If your fabric can be washed (or wetted) to dissolve the stabilizer, it is MUCH easier than teasing out the Ban-Rol "teeth" from the seam.
Alternatively, I use Louise Cutting's method (she says she found on thousand dollar high end RTW garments) which requires no stabilizer or special foot: stitch 1/8" from the edge. Fold edge in, using stitching line as guide, and stitch again. No pressing required. Fold edge in again and stitch. This is the final line of stitching and the only one that shows on the right side.
Alternatively, I use Louise Cutting's method (she says she found on thousand dollar high end RTW garments) which requires no stabilizer or special foot: stitch 1/8" from the edge. Fold edge in, using stitching line as guide, and stitch again. No pressing required. Fold edge in again and stitch. This is the final line of stitching and the only one that shows on the right side.
Posted on: 5/23/21 8:50 AM ET
Would fusible double sided, Paper-backed tape be a better alternative? I love the stuff and think it would work better than BanRol.
Emmaseabrooke.com
-- Edited on 5/23/21 at 8:52 AM ET --
Emmaseabrooke.com
-- Edited on 5/23/21 at 8:52 AM ET --
Posted on: 5/23/21 10:09 AM ET
In reply to unger
Unger...........a couple of years ago I was tasked with hemming a chiffon jr. bridesmaid dress for our granddaughter and after watching a bazillion videos of different methods this is an explanation of the method I ended up using successfully:
"I loved ConnieBJ's suggestion of the Ban-Rol, but a roll of it was going to cost me about $40 from Amazon and I didn't have time to wait for another company to ship it. I tried using strips of a course floral ribbon to do the same process, but would have spent hours picking out thread remnants with tweezers. What I ended up doing was rotary cutting 1" strips of water soluble interfacing and stitching that to the right side of the bottom edge of the chiffon. (Same method as the Ban-Rol) I used an edge-stitch foot and made the seam about 1/8". Then I folded that over to the inside and allowed the interfacing to pull the fabric under. At that point I went back and stitched a very narrow hem. Then I used appliqué scissors to cut away the excess interfacing and voilá, I had a pretty darn perfect tiny hem!! I can breathe again!!!"
I'm hoping my photo will post for you. Best of luck!!
------
CeCeC in Cedar Park, TX

------
"I loved ConnieBJ's suggestion of the Ban-Rol, but a roll of it was going to cost me about $40 from Amazon and I didn't have time to wait for another company to ship it. I tried using strips of a course floral ribbon to do the same process, but would have spent hours picking out thread remnants with tweezers. What I ended up doing was rotary cutting 1" strips of water soluble interfacing and stitching that to the right side of the bottom edge of the chiffon. (Same method as the Ban-Rol) I used an edge-stitch foot and made the seam about 1/8". Then I folded that over to the inside and allowed the interfacing to pull the fabric under. At that point I went back and stitched a very narrow hem. Then I used appliqué scissors to cut away the excess interfacing and voilá, I had a pretty darn perfect tiny hem!! I can breathe again!!!"
I'm hoping my photo will post for you. Best of luck!!
------
CeCeC in Cedar Park, TX
------
CeCeC in Cedar Park, TX
Brother Dreamweaver VQ3000, Brother 1034D, Brother PC420PRW, Bernina Artista 640E (up for sale!), and my grandmother's beautiful Singer treadle
Brother Dreamweaver VQ3000, Brother 1034D, Brother PC420PRW, Bernina Artista 640E (up for sale!), and my grandmother's beautiful Singer treadle
* Advertising and soliciting is strictly prohibited on PatternReview.com. If you find a post which is not in agreement with our Terms and Conditions, please click on the Report Post button to report it.
Selected Reviews, Classes & Patterns
Fancy Frocks Fabrics
Fine Designer Fabrics
Fine Designer Fabrics






![True Bias Aster Top and Dress Digital Pattern [0-18]](https://images.patternreview.com/sewing/patterns/truebias/aster/aster_t.jpg)

